Doble M4100 Power Factor Test Set / Insulation Analyzer

·        Diagnostic Test System / 12kV Power Factor Test Set
·        Industry standard for testing high-voltage power apparatus.
·        Line Frequency Modulation technology eliminates substation signal interference
·        Generates its own precise sine wave test signal to produce the most reliable results
·        Verify and recalibrate in the field, so it’s always accurate
·        Measure Power Factor/Tan Delta, Capacitance, and Excitation Current
·        Output current to 300mA at 10kV to duplicate in-service conditions
·        Optional Type C Resonator increases output capacity
·        Optional OTC (Oil Test Cell)
·        Optional M4100 TTR Capacitor
·        Optional M4110 Leakage Reactance Module
·        Optional M4140 Capacitor Bank Tester
·        Provided with preconfigured laptop, safety strobe, and temperature/humidity transmitter

1 - Bushing Adaptor
1 - RS232 to USB Adaptor
1 - Communication Cable
1 - Diagnostic Test Cable / W51 Field Adaptor
1 - 30' Ground Cable
1 - High Voltage Cable
1 - LD Insulated Cable
1 - RH / Temperature Cable
1 - 35' Safety Switch Cable
1 - 8' Safety Switch Cable
1 - Strobe Cable
1- Undergrounding Connector
5 - 5' Ground Cables
1 - 9" Hook
1 - Small Hook 
1 - Hot Collar Strap Set 
1 - Lead Bag
2 - 65' Low Voltage Leads
1 - Loopback Plug
1 - Loopback Receptor
1 - Manual
1 - 10' Power Cord 
1 - 50' Power Cord
1 - 6' Power Cord 
1 - Power Distribution Box
1 - RH / Temperature Sensor
1 - Strobe Light
**Request a laptop configured with Doble ProTest Software at no additional cost**