Often, the breakdown of unsuspecting components can trigger failures and result in hazardous conditions to patients, doctors, medical personnel and facility devices.
The Bender LT3000 Line Isolation Monitor (LIM) and GFCI Tester is an effective, versatile and portable instrument to conduct the tests required by NFPA 99 at regular intervals.
Simply plug the Bender LT3000 into any wall outlet up to 240V, 50 or 60Hz. Run a simple pretest to confirm the integrity of the isolated system and to give assurance that the system is properly grounded. The LCD meter normally displays system voltage. In the LIM/GFCI test mode, adjust the current until it reads 2, 5, or 6 mA on the LCD display. Alternately push L1 and L2 to confirm that the LIM or GFCI is working correctly
- • Tests line isolation monitors and ground fault circuit interrupters
• Operates on system voltages from 100 - 240 VAC
• Large digital LCD display
• Overload protection with automatic reset
• Easy to clean, rugged lexan front foil
• System leakage measurements
• Twist-to-lock adapter
• Lightweight (less than 1lb)
Related electrical test equipment available for rent from Protec:
Wherever the job takes you (and the equipment), with Protec's multiple locations, we always ship from the office closest to your desired drop location (if the electrical test equipment you need is in-stock at that location), and the equipment can be returned to the nearest office.
We always consider ALL shipping options in order to save you the most time and money.
Also, if you happen to be close to one of our many office locations, walk-ins are always welcome!
Rely on the Electrical Test Equipment Rental Experts, we are there when and where you need us.